John Deere Pump Drive Gear Boxes Component Technical Manual (CTM57)

Table of Contents(Component Technical Manual – CTM57)
Section 001—General Information
Group 05—Safety
Group 10—General Information
Group 11—Lubrication and Maintenance
Section 002— Repair and Adjustments
Group 20—28000, 59000 and 61000 Series Pump Drives
Group 30—56000 Series Pump Drives
Group 35—57000 Series Pump Drive
Group 40—Clutch
Group 50— Input Disconnect
Section 004—Diagnostics
Group 100—Observable Diagnostics
Section 005—Special Tools
Group 175—Special Tools
Group 499—Dealer Fabricated Tools
Section 006—Specifications
Group 400—Bolts and Cap Screws Specifications
For series 28 or 59: Refer to Section 002, Group 20 for 28000, 59000, and 61000 Series Pump Drives.
See Pump Drive — Identification (28000, 59000, and 61000 Series).
– For series 56: Refer to Section 002, Group 30 for 56000 Series Pump Drives. See Pump Drive — Identification (56000 Series).
– For series 57: Refer to Section 002, Group 35 for 57000 Series Pump Drives. See Pump Drive — Identification (57000 Series).
These are divided as per the table of content. Repair sections tell how to repair the components. Diagnostic sections help you identify the majority of routine failures quickly.
This manual was planned and written for the Service Department; its place is in the shop. Use the manual whenever in doubt about correct maintenance procedures. Use it as a text book for training new Service Department personnel who are unfamiliar with John Deere Tractors.
Daily use of this Service Manual as a guide in overcoming service problems will reduce error and costly delay to a minimum and as-sure you the best in finished service work. In many instances your customer’s confidence in your work will be improved when he sees you using the Service Manual. He knows you are following approved maintenance procedures and making proper adjustments. There is no guess-work when you use the manual.